Teejet Fieldware Link Manual do Utilizador descarregar pdf (Página 19)

98-05244-ENUS R1

Fieldware

Link 4.02

Staggered Implement Type

NOTE: This profile type will be loaded on to the console as “Straight”.

Basic Properties

►Description – used to enter the name of the Machine Settings

prole.

►GPS Antenna Height – used to measure the height of the

antenna from the ground. Range is 0.0 to 32.81 feet / 0.0 to

10.0 meters.

►Guidance Width – used to enter the distance between the

guidelines. Range is 3.28 to 246.06 feet / 1.0 to 75.0 meters.

►Implement Type – used to select Staggered as the layout of

the sections for the applied product location.

►Implement Offset Direction  – direction from the centerline of

the machine to the center of the implement while facing in the

machine’s forward direction

►Implement Offset Distance  – used to enter the distance from

the centerline of the machine to the center of the implement.

Range is 0.0 to 32.81 feet / 0.0 to 10.0 meters.

►Section 1 Offset Direction – used to select whether section 1

is located in front of or behind the GPS antenna as the vehicle

moves in a forward direction

►Antenna to Section 1 Distance  – used to enter the distance

from the GPS antenna to the section 1. Range is 0.0 to

164.04 feet / 0.0 to 50.0 meters.

►Number of Implement Sections – used to select the number

of implement sections. When ABSC Enabled is unchecked,

Number of Implement Sections is set to one implement section

and is unavailable for editing.

►Tank Capacity – used to enter the capacity of the tank

►ABSC Enabled – used to enable ABSC (Automatic Boom

Section Control) options

• Unchecked – single section setup options will be available

• Checked – Smartcable or SDM setup options will be available

(see “ABSC Enabled – Smartcable or Section Driver Module

Setup” section for details)

Implement Dynamics

►Section Width (under Spray Width in Matrix Pro v2.xx

or Matrix Pro GS v2.xx, or under Application width in

Matrix Pro GS v3.xx) – used to enter the total width of the

implement.

Job Specic Defaults

There are no available options.

Figure 34: Basic Properties

Figure 35: Implement Offset Distance and Direction

Figure 36: Machine Settings – Staggered Implement Type

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comentários a estes Manuais

Sem comentários

Teejet Fieldware Link Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Computadores Teejet Fieldware Link