Teejet IC18 SPREADER JOB COMPUTER Manual do Utilizador descarregar pdf (Página 19)

98-05271 R0 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Spreader European

Calibrations

Figure 3-20: Calibrations

Figure 3-21: Pulses per Volume

Figure 3-22: Calibration Step One

Calibrations establishes either manual or automatic settings of the sensors.

NOTE: For specific calibration options to appear, a specific sensor needs to be

installed. Sensor availability is activated on the Sensor Presence screen in

the OEM section.

Volume Per Pulse

Volume Per Pulse establishes the amount of cubic centermieters per one (1) pulse.

This value can be established manually or calibrated automatically. Each type of

spreader has a variety of variables that factor into the volume per pulse number

(roller diameter, sensor type, type of belt or chain, etc.). The volume per pulse

number factors these variables into the spreader output

Manual Calibration

Manual calibration establishes the volume based on a user entered value.

• To select the Pulses per Volume, use the number pad or slide bar.

Automatic Calibration

Automatic calibration establishes the volume using the automatic calibration

function.

• To calibrate the pulses per volume, select CALIBRATION KEY .

• Follow the series of instructions displayed.

NOTE: Material will be dispensed during this procedure. Be sure that a collection

device is in place so that a proper volume can be determined.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sem comentários

Teejet IC18 SPREADER JOB COMPUTER Manual do Utilizador Página 19