Teejet Sentry 6140 Manual do Utilizador Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 7
6
www.teejet.com
Sentry 6140 Tip Flow Monitor
SYSTEM COMPONENTS
If there are questions concerning the installation of the Sentry 6140 system on this vehicle, or due to the changes in component
specications the parts supplied in the kit are not exactly as presented in this document, please contact your dealer or TeeJet
Customer service representative for clarication before installation. TeeJet Technologies is not responsible for misuse or incorrect
installation of the system.
Sentry 6140 Console
The Sentry 6140 Console is designed to provide years of service under typical agricultural operating conditions. A tight tting enclosure means
that typical dusty environments will not cause operational problems. While occasional splashing of water will not damage the unit, the Sentry 6140
Console is not designed for direct exposure to rain. Take care not to operate the Sentry 6140 Console in wet conditions.
Figure 3: Sentry 6140 Console Front and Back
to Tip Flow Monitor Interface
Harness Connection
Power Switch
USB Port
Standard RAM Bracket
Bright Touch Screen
Nozzle Body with Flow Meter and Tip Sensor Interface
The turbine style ow meter used with the Sentry 6140 Tip Flow Monitor is compact, reliable and proven. The threaded connection allows the
sensor to be added onto a wide range of standard TeeJet single and multiple outlet nozzle bodies. ChemSaver® diaphragm check valves remain
in place allowing for positive spray tip shutoff. Ample clearance inside the ow meter means minimal ow restriction and generous free passage
for particles contained in the spray solution. Long wearing materials are used in bearing surfaces to ensure a consistent ow reading and the ow
meter sensor is mounted externally to prevent any direct contact with the spray solution for long-term reliability.
Figure 4: Flow Monitor Assembly
Tip Sensor Interface
to next Tip Sensor Interface
or End Terminator
to next Tip Sensor Interface
or Start Terminator
Tip Sensor Interface LED Flow Meter
Nozzle Body End Cap
Nozzle Body & Tips
Tip Sensor
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários