Teejet Legacy 6000 Manual Manual do Utilizador descarregar pdf (Página 47)

Chapter 2 - System Overview42

Adjust Oil Flow

1. From the main Launcher menu, select the System Tools softkey followed

by Device Manager. Scroll through the Device Manager options using

the Arrow keys and select the “FieldPilot” option. Press the Tools softkey

(F7).

2. Perform the test rolling slowly forward in an open area at 1 - 2 mph (1.5 –

3.0 km/h). Do not exceed 2 mph (3 km/h) during the test.

Figure 2-36: FieldPilot Steering Test

3. Scroll through the list in the Steering Test using the Up / Down Arrow

keys. The options “Left”, “Right”, and “Off” are available. Once selected,

the command to turn Left or Right can be executed by pressing the F7

softkey. The machine will then steer left or right at full open and will con-

tinue to do so until the operator exits the steering test. At any time dur-

ing the test, the operator can press the Back Arrow softkey or the

ESC key to stop the valve test.

Figure 2-37: FieldPilot Steering Test - Right Selection

System Tools

softkey (F2)

Device Manager

softkey

Arrow keys

Tools softkey

Back Arrow

softkey (F1)

NOTE: If signicantly different times are

found between Left to Right and

Right to Left steering, a physical

problem may be present in the

steering system.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 158 159

Sem comentários

Teejet Legacy 6000 Manual Manual do Utilizador Página 47