Teejet RX 400p Manual do Utilizador descarregar pdf (Página 23)

RX 400p

1-3 98-05044

the bottom of the RX 400p. Use the mounting brackets as a template when planning

and drilling mounting holes.

When selecting a location to install the receiver, you should ensure that:



The receiver is within reach of power, data, and antenna cable connections.



Sufficient room is available at the back of the receiver to connect and disconnect the

power, data, antenna, and ground cables.



Once you have installed the receiver, cables will not be bent excessively or pinched.



You have a clear view and access to the receiver’s front panel, to monitor the

receiver status.

1.3.2 Environmental Considerations

The RX 400p is designed to operate in an enclosed environment in which the

temperature remains between -32 °C and +74 °C and relative humidity is less than

95% (non-condensing). The receiver may be stored between -40 °C and +85 °C.

The CDA-2B Antenna is designed to operate in an open environment in which the

temperature remains between -40 °C and +85 °C and relative humidity is as high as

100%. The antenna may be stored at temperatures between -40 °C and +85 °C.

1.3.3 Power Considerations

The RX 400p uses a 2-conductor, positive locking, circular connector for application

of power. The RX 400p accepts an input voltage between 9.2 and 48 VDC. For best

performance, the supplied power should be continuous and clean. Table 1-1 details

the power specifications of the RX 400p receiver.

The back-lit LCD display of the RX 400p remains illuminated while power is applied

to the receiver.

Table 1-1 Power Requirements

Model Input Voltage Input Current

Input Power

RX 400p (with CDA-2B) 9 to 48 VDC <550 mA @ 12 VDC <6.5 W Nominal

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 150 151

Sem comentários

Teejet RX 400p Manual do Utilizador Página 23