
TECHNOLOGIES 834-P Sprayer Control
17 98-70028-R0
SPRAY TIP CAPACITY
Enter the combined capacity of all nozzles on the system. This should be measured in
Gallons Per Minute at 40 PSI. These capacities can be obtained from the nozzle
manufacturer’s catalog.
Use the
+
or
keys to adjust this value. Once the correct units have been selected,
press the key to advance to the next step.
Example: Two 8004 nozzles would have a combined capacity of .8 GPM at 40 PSI.
SWATH WIDTH
Enter the total swath width of the sprayer in inches.
Use the
+
or
keys to adjust this value. Once the
correct units have been selected, press the key to
advance to the next step.
tip
select
GPA
GPT
SPEED
RPM
On
Inch
lbs/rot
PROGRAM MODE push 3 sec.
Gal/min
@40 psi
P/300ft
P/rot
MPH
RPM
min
Comentários a estes Manuais