Teejet TASC-6100 Manual do Utilizador descarregar pdf (Página 31)

2-15

98-05018

CE & StandardVersion

TASC 6100

Setup

& Cal.

2.0 BAR. This is the value to enter into the console as the

pressure sensor cal. #. For example, in the following chart,

for a 8002-SS nozzle, the row for 2.0 BAR and column

for 10 KPH cross at 78.0 Liters per Hectare, the pressure

sensor cal. # for this particular nozzle.

NOTE: You must use the 2.0 BAR / 10 KPH value

regardless of the speed and pressure at which you are

operating.

Use the circled number for the pressure sensor calibra-

tion number.

Entering The Flow Sensor Calibration Number

Use the following procedure to enter the flow sensor

calibration number.

A. Set the console to the following positions;

1. Power ON

2. Mode Selector SET- UP

3. Display Selector Total Applied

4. Master switch OFF (ON If using

/Booms Pump L rEFLO)

B. Use the INC./DEC. switch to set the desired flow

sensor calibration number.

NOTE: If the console is in Reflow Mode (Pump L

rEFLOW), the flowsensor cal. # can only be viewed

or changed when all programmed booms are on.

DISPLAY SELECTOR

Speed

Area Impl. Width

Distance

Test

Speed

PSI/Prime

Total Applied

Application Rate

OFF SET- UP DEC.

OPERATE INC.

Scan

Product Vol.

Fan RPM

BOOMS

123456789

% Rate

A-1

A-2

A-3

MASTER

OFF

A-4

If using "Pump L rEFLO"

If using "Pump L STnrd"

or "Pump L PSi"

Liters per Hectare

Liquid Capacity 50 cm Spacing

Pressure in 7 8 10 12

Tip No. in bar l/min km/h km/h km/h km/h

2.0 0.65 111 97.5 78.0 65.0

TP8002-SS 2.5 0.72 123 108 86.4 72.0

3.0 0.79 135 119 94.8 79.0

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 85 86

Comentários a estes Manuais

Sem comentários

Teejet TASC-6100 Manual do Utilizador Página 31

Comentários a estes Manuais

Manuais e produtos relacionados com Computadores Teejet TASC-6100